易賣工控網（news.tpt0.cn）提供”M128-010 MOOG 原裝正品質保一年”，產品詳情：品牌/廠家：、型號：M128-010、成色：全新、貨期：現貨 1天內發貨、保修：365天，更多產品詳情就上易賣工控網。

MAMC和NIOC板的外部24V電源
當為了保證在主電源斷電時控制盤和NAMC以及NI0C板依然有效，要使用獨立的供電電源。ACC600隨附組裝指導(ACC600外部+24Vd.c電源。58976270. DOC)和電纜組(3AFE61298771)。通電確認信號輸入若ACC 600裝有用于NAMC以及NIOC板的外部24V電源，則建議將交流電源接觸器的一個NO(NormallyOpen)的輔助觸點連接到數字輸入上，作為“通電確認”信號，如: DI2。 輸入用參數10.5選擇。使用通電確認輸入信號接通電源時，系統將自動復位。同時在斷電時將斬波器故障及”PPCC LINK”故障屏蔽，以便能夠接受通電確認信號通電確認輸入的“0”會產生“關”的命令給ACC 600，即:慣性停車將造成機械抱閘。在通電確認輸入為“0”時無法對ACC 600進行操作!注意:若使用ACC 600工程傳動，參數10.5 POWER ON ACKN SEL應設定為=DI2 !
External 24V power supply for MAMC and NIOC boards

In order to ensure that the control panel, NAMC and ni0c board are still effective when the main power supply is powered off, independent power supply shall be used. The acc600 comes with assembly instructions (acc600 external + 24vd. C power supply. 58976270. DOC) and cable set (3afe61298771). Power on confirmation signal input if ACC 600 is equipped with external 24V power supply for NAMC and NIOC board, it is recommended to connect an NO (normally open) auxiliary contact of AC power contactor to digital input as "power on confirmation" signal, such as di2. Input is selected with parameter 10.5. When the power on confirmation input signal is used to power on, the system will reset automatically. At the same time, shield the chopper fault and "PPCC link" fault in case of power failure, so as to accept the power on confirmation signal. The "0" input of power on confirmation will generate a "off" command to ACC 600, that is, inertial parking will cause mechanical holding brake. ACC 600 cannot be operated when the power on confirmation input is "0"! Note: if ACC 600 engineering transmission is used, the parameter 10.5 power on ack sel should be set to = di2!